|
Product Details:
|
| Max Intermittent Pull: | 180KN | Max Continuous Pull: | 150KN |
|---|---|---|---|
| Speed At Max Pull: | 2.5km/h | Max Speed: | 5km/h |
| Diesel: | 239kw(320hp) | Cooling System: | Water |
| High Light: | transmission line stringing tools,cable pulling tools equipment |
||
Stringing Equipment or Cable Pulling Stringing Equipment in German Hydraulic Instrument
Product Introduction
Hydraulic puller 180KN fit to pull one rope in stringing operations of overhead transmission lines.
One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.
Structure Parameter
| Diameter of traction wheel | 700mm |
| Slot number | 10 |
| Maximum wire rope diameter | 27mm |
| Allow for maximum connector diameter | 1400mm |
| Total weight | 6800kg |
| Dimensions of the whole machine | 4300×2360×2380mm |
Performance Parameter
| Maximum tractive force | 180KN |
| Maximum sustained traction | 150KN |
| Correspending speed | 2.5km/h |
| Maximum sustained tractive speed | 5km/h |
| Corresponding tension | 75KN |
Engine
| Diesel | 239kw(320hp) |
| Cooling system | water |
| Electric system | 24V |
Main Configuration Instructions
| Hydraulic instrument | German |
| Tailstock motor | America Eton |
| The main motor, reduction gears | German Rexroth |
| Main variable pump | German Rexroth |
| Engine | cummins |
Contact Person: Mr. Marble Wu
Tel: 8613301534008
