|
Product Details:
|
| Key Words: | Transmission Line Stringing Equipment ,Overhead Line Stringing Equipment ,Cable Puller Stringing Equipment | Bull-wheel Diameter: | 540mm |
|---|---|---|---|
| Groove Number: | 8 | Max Rope Diameter: | 21mm |
| Max Diameter Of Rope Reel: | 1400mm | Engine: | Cummins |
| Main Pump: | German Rexroth | Main Motor Speed Reducer: | German Rexroth |
| Max Intermittent Pull: | 90KN | Useage: | Hydraulic Tensioner And Puller Machine |
| High Light: | 9 Ton Pulling Stringing Equipment,OPGW Cable Hydraulic Winch,power line tensioner |
||
9Ton Pulling OPGW Cable Hydraulic Winch Overhead Line Stringing Equipment
Overhead Line Stringing Equipment
9 Ton Hydraulic Winch Puller is used for overhead transmission line single or two conductors stringing.
The machine is equipped with Water Cooled Cummins Diesel Engine and Hydraulic Rexroth Pump with closed hydraulic system.
|
Overhead Line Stringing Equipment This machine allows for the tension stringing of twin-bundle conductor of 500mm2 and below in mountainous and hilly areas, of twin-bundle conductor of 630mm2 and below in flat lands, and of single conductor 720mm2 in various terrains; besides, it can be used for traction stringing of OPGW or ADSS optical cable and 220kV haulage rope in various terrains. |
|
Overhead Line Stringing Equipment Characteristics Bull-wheel diameter: 540mm Groove number: 8 Max rope diameter: 21mm Max diameter of rope reel: 1400mm Total weight: 4350kg Overall dimension (length*width*height): 4500*2100*2450mm |
|
Hydraulic Winch Pulling Machine Characteristics Bull-wheel diameter: 540mm Groove number: 8 Max rope diameter: 21mm Max diameter of rope reel: 1400mm Total weight: 4350kg Overall dimension (length*width*height): 4500*2100*2450mm |
|
Hydraulic Winch Pulling Machine Engine Diesel 118kw(158hp) Euro II, 4-stroke cycle, turbo-charged Cooling system: liquid Electrical system: 24V |
|
Hydraulic Winch Pulling Machine Hydraulic Transmission Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur. |
|
Hydraulic Winch Pulling Machine Main configuration Engine: Cummins hydraulic pump: German Rexroth Main motor: German Rexroth speed reducer: German Rexroth Tail bracket hoisting motor: American Eton Hydraulic meter: German WIKA Operating handle: German Rexroth |
|
Configuration Hydraulic dynamometer with set-point and automatic control of maximum pull Hydraulic oil cooling system Control instruments for hydraulic system and diesel engine On board reel winder with automatic level wind, suitable for standard reel mod. 1100 and 1400 Hydraulic front stabilizer Grounding connection point |
|
Additional Devices Lighting system for the trailer Hydraulic rope clamp for reel change Swivel guide rope roller Trailer for towing at max speed of 30 km/h Extra shaft Digital speed and meter counter (extra charge) |
|
Additional Devices The chassis provided with Brake, back lights and mudguard, with a single point lift to allow lifting with a crane. Cable and radio remote control fully replacing all controls at machine panel. Remote diagnosis via GSM network with GPS modem, Synchronization system Hydraulic system for drum stand control with flat face quick action couplings Auxiliary Hydraulic system (700/1000 bar) for power pressing tool Lockable toolbox, Holding fixture for hose kit, Grounding plate, Acoustic insulation Biodegradable hydraulic oil, Allowable tension indictor, Overload tension alarm, First Aid Kit Manufacturer's workshop maintenance manual, in English |
Contact Person: Mr. Marble Wu
Tel: 8613301534008
