|
Product Details:
|
| Maximum Intermittent Tension: | 2×70KN | Maximum Sustained Tension: | 2×65KN |
|---|---|---|---|
| Maximum Pay-off Speed: | 5km/h | Total Weight: | 7500kg |
| Boundary Dimension: | 4700×2300×2700mm | Name: | Hydraulic Tensioner In Power Line Stringing Equipment |
| High Light: | cable pulling equipment,genset diesel generator |
||
Hydraulic Tensioner in Transmission Line Equipment Using Import German Rexroth Hydraulic Motor
Product Introduction
Hydraulic tensioner fit to tension one or two conductors or optical fiber cables.
One hydraulic circuit let to tension at constant force even varying the speed of stringing.
One pair of steel capstans lined with multi-grooved nylon sectors.
Machine control panel equipped with hydraulic dynamometer and mechanical metercounter.
Device to control low-force tensions (4-30KN), specially fit for fiber-optic cables.
Freewheeling disconnection(neutral) of capstans.
Two back fix conductor-drivers with nylon rellers.
Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
Stabilisers, share and attachments for anchoring the machine.
Heat exchanger to cool the oil in the hydraulic circuit.
Grounding connection point.
Performance Parameter
| Maximum intermittent tension | 2×70KN |
| Maximum sustained tension | 2×65KN |
| Correspending speed | 2.5km/h |
| Maximum pay-off speed | 5km/h |
| Corresponding tension | 2×25KN |
| Maximum back-traping force | 2×60KN/1×120KN |
| Maximum back-traping speed | 5km/h |
Main Configuration Instructions
| Engine | Cummins |
| Reduction gear | German Rexroth |
| Hydraulic motor | German Rexroth |
| Pressure gage | German |
Structure Parameter
| Bottom diameter of tension wheel groove | 1700mm |
| Trial traverse diameter | 40mm |
| Slot number | 2×6 |
| Total weight | 7500kg |
| Boundary dimension | 4700×2300×2700mm |
Engine
| Feeding | diesel |
| Cooling system | water |
| Electric system | 24V |
Contact Person: Mr. Marble Wu
Tel: 8613301534008
