|Output:||10T,12T||Crimping Type:||Hexagon Crimping|
|Package:||Delicate Packaging||Name:||Integral Manual Hydraulic Tool In Transmission Line Tool|
overhead line construction tools,
manual chain block
Integral Manual hydraulic Tool in Transmission Line Tool in Delicate Packaging
Check whether the pressed terminal matches the wire specification.Instructions
Select the mold you want to press, such as the gauge of the pressed terminal 240², then select the upper and lower mold of 240².
Put the mould into the piston and head seat respectively.
Repeatedly start the operation handle and watch the mold. When the upper and lower molds meet a profit, the pressure is finished.
If the user does not pay attention to continue the start, the pump will have the sound of "click click click click", which will be opened for the safety protection device, the piston stops moving, the operating handle should be rotated clockwise so that the top part is pressed down against the top village, then the piston will return to its original position.
Contact Person: Marble Wu