Product Details:
|
Key Word: | Transmission Line Stringing Equipment ,Overhead Line Stringing Equipment,Hydraulic Puller Stringing Equipment | Max Intermittent Pull: | 220KN |
---|---|---|---|
Max Continuous Pull: | 180KN | Speed At Max Pull: | 2.5km/h |
Pull At Max Speed: | 90KN | Diesel: | 239KW(320hp) |
Cooling System: | Water | Electrical System: | 24V |
Bull-wheel Diameter: | 760mm | Groove Number: | 10 |
Highlight: | high voltage glass insulators,glass power line insulators |
Aerical Stringing 239KW(320hp) 22T Hydraulic Cable Puller Winch Machine
22T Hydraulic Cable Puller Winch Machine
Our 220KN hydraulic cable puller winch machine features high-security operation,
especially when a hydraulic failure occurs resulted from the sudden flameout of motor or other reasons.
This is because the spring applied hydraulically released brake can act automatically.
Another striking characteristic lies in its hydraulic type rope clamping device. Owing to it,
the steel wire rope reel can be replaced conveniently. With the steel wire rope automatically winding device,
our puller is able to arrange the rope by itself as well as load and unload easily.
22T Hydraulic Cable Puller Winch Machine Performance :
Model | GS220 |
Max. Pulling Force (KN) | 220 |
Continuous Max. Pulling Force (KN) | 180 |
Speed at Max. continuous pull: | 2.5km/h |
Max. Pulling Speed (m/min) | 5km/h |
Pull at max speed(KN) | 90 |
22T Hydraulic Cable Puller Winch Machine Characteristics:
Root Diameter of Bull wheel (mm) | Φ760 |
Number of grooves | 10 |
Max. Steel rope Diameter (mm) | Φ30 |
Weight (kg) | 6800 |
Overall dimension (length*width*height) | 5300×2600×2750mm |
22T Hydraulic Cable Puller Winch Machine Engine:
Model of Diesel Engine | Water cooled diesel engine |
Power of Diesel Engine | 239 KW(320hp) |
Electrical System | DC24V |
22Ton Ovehead Line Stringing Equipment Main configuration:
Engine | Cummins |
Main pump | German Rexroth |
Main motor speed reducer | German Rexroth |
Tail bracket hoisting motor | American Eton |
Hydraulic meter | German |
Operating handle: | German Rexroth |
22Ton Overhead Line Stringing Equipment Configuration:
Hydraulic dynamometer with set-point and automatic control of maximum pull
Hydraulic oil cooling system
Control instruments for hydraulic system and diesel engine
On board reel winder with automatic level wind, suitable for standard reel mod. 1400 and 1600
Hydraulic front stabilizer
Grounding connection point
22Ton Overhead Line Stringing Equipment Hydraulic Transmission:
Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided with
a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by
automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
Additional Devices:
Lighting system for the trailer
Hydraulic brake system for the trailer
Extra rollers for an additional pilot rope
Hydraulic rope clamp for reel change operations
Extra shaft
Electronic pull and speed recorder
Contact Person: Mr. Marble Wu
Tel: 8613301534008