Product Details:
|
Maximum Intermittent Tension: | 45KN | Maximum Pay-off Speed: | 5km/h |
---|---|---|---|
Maximum Back-traping Force: | 35KN | Total Weight: | 2300kg |
Boundary Dimension: | 3520×2000×1710mm | Pressure Pump: | German Rexroth/ Italy Sam |
High Light: | power cable pulling equipment,tension stringing equipment |
Powerline Equipment Hydraulic Tensioner Equipment 4T with Cummins Engine
Structure Parameter
Bottom diameter of tension wheel groove | 1300mm |
Trial traverse diameter | 40mm |
Slot number | 5 |
Total weight | 2300kg |
Boundary dimension | 3520×2000×1710mm |
Performance Parameter
Maximum intermittent tension | 45KN |
Maximum sustained tension | 40KN |
Correspending speed | 2.5km/h |
Maximum pay-off speed | 5km/h |
Corresponding tension | 20KN |
Maximum back-traping force | 35KN |
Main Configuration Instructions
Engine | Cummins |
Reduction gear | German Rexroth |
Hydraulic motor | German Rexroth/ Italy Brrevini |
Pressure gage | German |
Pressure pump | German Rexroth/ Italy Sam |
Engine
Feeding | diesel |
Cooling system | water |
Electric system | 24V |
Product Introduction
Hydraulic tensioner GX1×40 fit to string one or two conductors or optical fiber cables.
One hydraulic circuit to tension at constant force even varying the speed of stringing.
One pair of steel capstans lined with multi-grooved nylon sectors.
Machine control panel equipped with hydraulic dynamometer and mechanical metercounter.
Device to control low-force tensions (1,5-20KN), specially fit for optical fibers.
Freewheeling disconnection(neutral) of capstans.
Two back fix conductor-drivers with nylon rellers.
Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
Stabilisers, share and attachments for anchoring the machine.
Contact Person: Marble Wu