|
Product Details:
|
| Trial Traverse Diameter: | 46mm | Maximum Intermittent Tension: | 2x70KN/ 140KN |
|---|---|---|---|
| Maximum Pull: | 2x70KN/ 140KN | Maximum Sustained Pull: | 2x30KN/ 60KN |
| Correspending Speed: | 2km/h | Feeding: | Diesel |
| High Light: | cable pulling equipment,genset diesel generator |
||
Transmission Line Equipment Hydraulic Puller-Tensioner Equipment 14T with 173hp Diesel Engine
Structure Parameter
| Bottom diameter of tension wheel groove | 1700mm |
| Trial traverse diameter | 46mm |
| Total weight | 8000kg |
| Boundary dimension | 4700×2300×2700mm |
Performance Parameter
| Maximum intermittent tension | 2x70KN/ 140KN |
| Maximum pull | 2x70KN/ 140KN |
| Maximum sustained pull | 2x30KN/ 60KN |
| Correspending speed | 2km/h |
Main Configuration Instructions
| Engine | Cummins |
| Reduction gear | German Rexroth |
| Hydraulic motor | German Rexroth |
| Pressure gage | German |
| Pressure pump | German Rexroth |
Engine
| Feeding | diesel |
| Cooling system | water |
| Electric system | 24V |
Product Introduction
Hydraulic puller-tensioner GX2x70 TP designed to operate either as a tensioner and a puller, fit to string one or two ropes or conductors.
Two hydraulic circuits let to tension at constant force even varying the speed of stringing. The two circuits can be used independently or simultaneously, with automatic partition of the forces.
Freewheeling disconnection(neutral) of capstans.
Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
Stabilisers, share and attachments for anchoring the machine.
Oil cooling system.
Devices for coupling the two pairs of the capstans.
Two auxiliary hydraulic circuits for additional equipment.
Grounding connection point.
 |
|
|
|
Contact Person: Mr. Marble Wu
Tel: 8613301534008
