|
Product Details:
|
| Bottom Diameter Of Tension Wheel Groove: | 1200mm | Trial Traverse Diameter: | 34mm |
|---|---|---|---|
| Total Weight: | 2200kg | Boundary Dimension: | 4000×2000×2300mm |
| Maximum Intermittent Tension: | 35KN | Correspending Speed: | 4.5km/h |
| High Light: | tension stringing equipment,cable pulling equipment |
||
Transmission Line Equipment Hydraulic Puller-Tensioner Equipment 3.5T with Cummins Engine
Structure Parameter
| Bottom diameter of tension wheel groove | 1200mm |
| Trial traverse diameter | 34mm |
| Total weight | 2200kg |
| Boundary dimension | 4000×2000×2300mm |
Performance Parameter
| Maximum intermittent tension | 35KN |
| Maximum pull | 35KN |
| Maximum sustained pull | 20KN |
| Correspending speed | 4.5km/h |
Main Configuration Instructions
| Engine | Cummins |
| Reduction gear | German Rexroth |
| Hydraulic motor | German Rexroth |
| Pressure gage | German |
| Pressure pump | German Rexroth |
Engine
| Feeding | diesel |
| Cooling system | water |
| Electric system | 24V |
Product Introduction
Hydraulic puller-tensioner GX35TP designed to operate either as a tensioner and a puller, fit to string one rope or conductor.
One hydraulic circuit lets to tension at constant force even varying the speed of stringing.
Device to control low-force tensioons(1-15KN), fit for OPGW cables.
Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
Stabilisers, share and attachments for anchoring the machine.
Oil cooling system.
Auxiliary hydraulic circuit for additional equipment.
Grounding connection point.
Contact Person: Mr. Marble Wu
Tel: 8613301534008
