|Maximum Intermittent Pull:||180KN||Maximum Sustained Pull:||150KN|
|Correspending Speed:||2.5km/h||Corresponding Pull:||75KN|
|Total Weight:||6800kg||Boundary Dimension:||4300×2360×2380mm|
hydraulic cable puller,
transmission line stringing equipment
American Eton Tail Bracket Hoisting Motor 180KN Cable Pulling Equipment Ton Overhead Transmission Puller
Hydraulic puller fit to pull one rope in stringing operations of underground cables or overhead transmissions lines.
One hydraulic circuit lets to vary continuously the speed in both directions by operating one only device.
One pair of multi-grooved steel capstans fit for stringing one steel rope.
Machine control panel equipped with built-in electronic instrument featuring a large graphic color display and a USB port.Main functions include display of full-force, speed and length of cable in real time, max pull force setting, display of working hours, data recording and storage of a pen-drive(data processing software provided) .
Safety negative hydraulic brake.
Chassis with rigid axle, overrun brake and drawbar for towing at low speed on workplace.
Hydraulic back stabilisers and front share.
Attachments for anchorage and for lifting.
Heat exchanger to cool the oil in the hydraulic circuit.
Reelwinder fit for a 700-mm-dia reel, with automatic ropewinder.
|Maximum intermittent pull||180KN|
|Maximum sustained pull||150KN|
|Maximum pay-off speed||5km/h|
Main Configuration Instructions
|Reduction gear||German Rexroth|
|Hydraulic motor||German Rexroth|
|Bottom diameter of pull wheel groove||700mm|
|Trial traverse diameter||27mm|
Contact Person: Marble Wu