Product Details:
|
Pull At Max Speed: | 15KN | Max Pull Force: | 100KN |
---|---|---|---|
Overall Dimension: | 4000*2200*1800mm | Application: | Underground |
Capstans: | 350x650mm | Diesel: | 49.2hp/36kw |
Continuous Pull Effort: | 80KN | Total Weight: | 3350kg |
Highlight: | electric wire pulling equipment,power cable pulling equipment |
Max pull force 100kN 49.2hp Hydraulic Puller For Underground Cable Pulling Machine
Hydraulic puller is suitable for laying underground transmission cables and optics fiber cables, it is driven by a diesel-hydraulic power unit that is completely enclosed within an area of coverage, limiting noise emissions.
Performance
Model | GP100 |
Max pull force | 100kN |
Continuous pull effort | 80kN |
Max speed at Continuous pull | 17m/min |
Max speed | 83m/min |
Pull at max speed | 15kN |
Capstans | 350x650mm |
Maximum cable diameter | 80 mm |
Total weight | 3350kg |
Overall dimension (length*width*height) | 4000*2200*1800mm |
Engine
Diesel | Yanmar Japan 49.2hp/36kw |
Cooling system | Water |
Electrical system | 12V |
Main Configuration
Engine | Yanmar Japan |
Hydraulic motor | Rexroth German |
Hydraulic pump | Danfoss |
Hydraulic meter | German |
Operating handle | Bondioli & Pavesi Italy |
Hydraulic valve | Sun USA |
Anti-twist Steel rope
D18mm 700m
We can customize the size and length as your request.
Configuration
Control panel with instruments for hydraulic system and engine.
A dynamometer used to check pull values
Hydraulic oil cooling system
In the case of over pull, the preset for maximum tension can stop the puller
The hydrostatic loop, which allows the puller to continue to change speed in two rotational modes, can operate only one command
Hydraulic emergency brake operates automatically at the center of the instruction bar or in the case of hydraulic failure (not suitable for lifting)
Mechanical front and rear stabilizer
Grounding connection point
Large channel steel capstan with anti-skid device
Hydraulic Transmission
Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
Additional Devices
Lighting system for the trailer
Swivel guide rope roller
Chassis, with damping shaft, tires, traction lever, Trailer for towing at max speed of 30 km/h
Digital speed and meter counter (extra charge)
Accessories for anchoring and lifting
The heat exchanger cools the oil in the hydraulic circuit
Rear tension roller with hydraulic drive
COMPANY PROFLIE
Established in 2016, Galaxy Power Industry Limited. is a manufacturer specialized in the research, development and production of Electric Power Machinery. We are a high-tech enterprise in China. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our products sell in Australia, Turkey, Mexico, Panama, Peru, Brazil, Egypt, Sudan, Kenya, Angola, Pakistan etc. Our products are also very popular and best-selling in china.
1. Main configurations of our machine are from Germany and USA Engine: American Cummins Main pump: German Rexroth Main motor: German Rexroth Speed reducer: German Rexroth Tail bracket hoisting motor: American Eton Hydraulic meter: German Operating handle: German Rexroth
2. We have one year quality guarantee. if internal components go wrong within one year, we will change another for free.
3. We can supply the specific components to the buyers with cost price after warranty period.
Contact Person: Mr. Marble Wu
Tel: 8613301534008